TWIN AIR LIQUID DIRT REMOVER

Foam Oil Filter Cleaner

4 Litre tin

Ideal for MX / Enduro bikes with washable Foam Air filters

Works best when used with Twin Air Air Filter Oil
Unsuitable for use with paper element air filters.

• STEP 1: Clean filter

Soak filter in Twin Air Liquid Dirt Remover in a tub for 3-5 minutes to cut the filter oil. Work out any trapped dirt or particles. The most important thing is that the inside of the filter is free of any particles whatsoever.

TIP: Do not use petrol or other harsh chemical cleaners!!! These break down the glue holding the foam filter together. They also prematurely deteriorate the foam.

• STEP 2: Rinse Filter

Rinse Filter with warm, soapy water, making sure all dirt particles are removed. Repeat step 2 if necessary. Be sure to rinse the filter with clean water to ensure the soap residue is gone.

• STEP 3: Dry Filter

Place filter on paper towel or hang your filter somewhere clean and allow it to dry properly. Oiling the filter without allowing it to dry sufficiently will trap some of the moisture.