Extreme pressure

TYPE OF USE
All mechanical transmission synchronised or not synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCES STANDARDS
API GL4 and GL5 / MIL-L-2105D Extreme pressure lubricant for an efficient anti wears protection. Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard.
Very high lubricating power which decreases friction and wear.
90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
Suitable for any type of seal and yellow material used in gearboxes design.
Anti-corrosion, Anti-foam.

RECOMMENDATIONS
Oil change: According to manufacturers’ requirements and adjust according to your own use.

PROPERTIES
Viscosity grade SAE J 306 80W-90
Density at 20°C (68°F) ASTM D1298 0.890
Viscosity at 40°C (104°F) ASTM D445 144 mm²/s
Viscosity at 100°C (212°F) ASTM D445 15.0 mm²/s
Viscosity index VIE ASTM D2270 105
Flash point ASTM D92 210°C / 410°F
Pour point ASTM D97 -27°C / -16°F